DC charging for sites that cannot justify a full fast-charging station. At 759 × 310 × 720 mm the cabinet is a fraction of the footprint of our floor-standing stations, which makes it viable for hotels, dealerships, workplaces, small retail parks and fleet yards where space and grid capacity are both limited.

The charging module is a constant-power potted design with output up to DC 1000 V. Constant power is held from 300 V, so a vehicle on an 800 V architecture receives the full rating rather than a current-limited figure. The 20 kW model delivers 66.7 A, the 30 kW model 100 A and the 40 kW model 125 A.

Intelligent standby mode is the feature that matters most in this class. These chargers spend the majority of their life idle, and reducing idle consumption directly improves the economics of a site that may only see a handful of sessions a day.

The structure is deliberately flexible — a unit can be configured to order and upgraded in the field up to 40 kW, so a site can start small and add capacity as demand grows without replacing the cabinet. The enclosure is sheet metal with a baked paint finish, rated IP54 for outdoor installation, and the design conforms to GB/T 20234.3-2023.

Protection covers charging gun temperature detection, over-voltage, under-voltage, overcurrent, overload, short circuit, over-temperature, leakage, lightning and reverse connection.